10 John Deere L130 Problems & Solutions


If your home is situated on more than half an acre piece of land, you need an efficient lawn mower to help keep it neat.

John Deere L130 is one of the machines you may consider buying. It will enable you to quickly cut the grass and help keep your lawn in good shape.

The John Deere L130 Overview

You will find working with John Deere l130 exciting if you love mowing. The machine is an improved version of the l110 mower—however, the difference between the two machines is the size of the lawn mower and the engine capacity.

The 130 version runs on Kohler CV23S engine – a two-cylinder gasoline engine with a capacity of 0.7 litters and 23Hp output.  While the l110 version runs on Kohler CV491 with a displacement of 490cc and 17.7 hp.

See: 1023e John Deere problems

John Deere l130 Problems

  1. The engine doesn’t start
  2. Engine overheats
  3. Clutch problem
  4. Transmission issues
  5. Rea end problem
  6. Steering issues
  7. Carburetor problems
  8. Battery troubles.
  9. Electrical system malfunctions.
  10. Fuel delivery problems.

1. John Deere l130 won’t start

John Deere l130 problems are more despite the splendid job the tractor does. For instance, the tractor may refuse to start when you turn on the ignition key. There are several reasons why this could happen.

There could be a battery issue, or the cylinder could be dry. These problems could occur at the same time or at different times.

Either way, you must find a solution to them before the mower can roar back to life.

Read: John Deere Z930M Misfortunes


  • If the battery has an issue, you may consider replacing it. Typically, if the battery is old, it will not deliver enough power to start the machine. In such a case, you will be better off buying a new one. 
  • Check the battery terminals and the power cables to see if they are in good shape. If everything is fine, but the engine does not start, the problem may be elsewhere.
  • Test the cylinders- the best way to test if the cylinders are dry is to remove the spark plug and see if the oil spills out. If the oil does not spill, the cylinders are dry, so you must spray them with engine oil enhancers or any fuel treatment oil.

2. John Deere L130 Mower Engine Overheats

John Deere l130 Engine is powerful but can overheat if you overload it. There are several reasons for this. Firstly, overloading may occur if you mow wet or heavy grass.

Secondly, if the air intake is not optimal due to a clogged screen or poor-quality oil. This could also make the engine overheat.

Thirdly, it may overheat if the engine oil is low or poor.

Fourthly, the engine may overheat if dirt accumulates in the bearing.

 Lastly, if the carburetor is set to idle too fast, it may still overheat.

Related: John Deere 3025e Misfortunes


Thus, to solve the overheating problem, you’ll need to do the following:

  • Check if the oil level is OK — if not, top it up
  • Change the oil and the filters
  • Ensure the cooling fins are working
  • Clean dirty components, including the area of the crankshaft, attach to the main bearing.
  • Adjust the carburetor

Any of these solutions could correct the overheating problem. However, if the problem persists, escalate it to a mechanic.

3. L130 John Deere Clutch Problems

The clutch is the lifeline of the mower. It enables you to transfer the power to different tractor parts when needed. Unfortunately, a worn-out PTO clutch may not be able to transfer power. Instead, engaging it blows off the fuse.

Also, as you engage the clutch, the wires wear out. In turn, the naked wire shorts the tractor’s body, blowing off the fuse or the PTO switch.

As a result, the clutch cannot transfer the power to other parts of the tractor.

See: Common John Deere La145 Problems


  • If the clutch has an issue, disconnect it and unplug the wires
  • Unscrew the bolt to remove the guard and clean the clutch. In addition, check defective connections, repair the wires, and mask them using tape to prevent shorting.
  • Put the clutch in place and screw back the guard
  • Check the switch and replace it if it is blown off
  • Cleaning the clutch and replacing the switch should help you fix the mower. But, if the clutch still experiences problems, you may contact a mechanic.

4. John Deere L130 Lawn Mower Transmission Problem

John Deere l130 problems are many and varied. But the hydrostatic transmission lawn tractor problem is the most serious one.

It’s also a common problem with John Deere D130.

The problem reduces the ability of the mower to get up a steep hill. This may happen even when the engine is in very good shape. So, the sooner you find a solution, the better.


5. John Deere l130 Lawn Tractor Steering Issues

As you continue mowing, you will notice that it becomes more difficult to steer the mower with time.

The steering may be too stiff or too loose. Sometimes, you will feel that the turning radius is too short.  All these are signs of issues with the steering.


  • If it is challenging to steer the mower, look beneath the steering wheel and assess the bushes and the pinion gear. If the bushes or the pinion gear are worn out, you will likely experience steering challenges. The worn-out gears make the steering experience excessive friction, making it difficult to steer the tractor. Thus, changing the sector plate, pinion and bushing may solve the steering problem.

Read: John Deere 757 Problems

6. L130 John Deere Rear End Problem

Issues with the transaxle constitute rear-end problems. Typically, the transaxle consists of transmission and ancillary systems. This system is located between the back wheels. So after months of usage, the transaxle weakens and inhibits the flow of transmission fluids. It results in rear-end problems that you must fix.


  • Check if there are sticks and debris stuck in the transaxle. If present, remove them to solve the problem.
  • On the other hand, if the mower experiences a sudden loss of drive, it indicates that the drive pulley is stripped out. In such a scenario, you will need to buy another pulley.
  • If the above solutions do not solve the rear-end problem, you may need to reassemble the hydrostatic transaxle. Reassembling the transaxle may be difficult if you have no expertise. So, the option you have is to buy a new system. Alternatively, you may buy a transaxle upgrade kit, which may still serve the purpose.

7. John Deere l130 Carburetor problems

John Deere L130 Problems Image

The carburetor is an essential component at the top or side of the tractor. It mixes the oil and air in the required ratio to allow combustion. If the carburetor is faulty or dirty, it inhibits combustion and makes the engine choke off.


  • The first thing you’ll need to do is to clean the fuel tank and the carburetor. Start by unscrewing the nuts that hold the carburetor and the engine. Use a piece of cloth or a rug to remove dirt on any build-up in the carburetor. You may then use an additive to clean it.
  • Blow air in the carburetor to remove any remaining dirt.
  • Check if oil filters and fuel lines are clogged. If they are, ensure to clean them and replace the defective fuel pump. 
  • Replace the filter and reconnect it to the oil line.

8. The Engine Runs, But the Tractor Does Not Move

There could be several issues if the mower does not move when the engine is running. They range from locked parking brakes to bypass levers to loose mower blades. Other causes may include incorrect blade balance and too little or too much oil.


  • The first thing you’ll need to do is to check and unlock the parking brake. If it still doesn’t move, disengage the bypass valve lever to see if it gives the mower a forward thrust.
  • Check and fasten the mower blades or balance them. You may also consider replacing the blades if they are overused and worn out.
  • If the oil is too little, add more.

9. John Deere l130 lawn Tractor Vibrates Too Much

The vibration may become too much after months of using the tractor to mow the compound. This may be a result of a damaged belt or worn-out pulley. Also, if the belt and the pulley are out of cantering, it may cause vibration.


  • Start by removing the clogging from the sheaves or mower deck to stop the vibration. Also, consider replacing the worn-out components, balance the blades, and checking the canter. 

10. Battery Troubles in John Deere L130 Mower

Battery troubles can be a common issue with the John Deere L130 riding mower. They affect its ability to start and function properly.

The battery is crucial for powering the engine’s initial crank and operating electrical systems like lights and safety switches.

When the battery has problems, it can lead to frustrating starting issues and hinder the mower’s overall performance.

Possible Causes:

  1. Weak or Dead Battery: Over time, batteries can lose charge capacity due to age and use. A weak battery may not provide enough power to start the engine or run electrical components.
  2. Corroded Terminals: Corrosion can accumulate on the battery terminals, hindering electricity flow between the battery and the mower’s electrical system. This causes poor connections and starting problems.
  3. Faulty Alternator: The alternator charges the battery while the engine runs. If it fails, the battery won’t receive enough charge, leading to starting issues.

Possible Fixes:

  1. Check Battery Charge: Use a tester or multimeter to check the battery’s charge level. Charge it with an appropriate battery charger if needed.
  2. Inspect Battery Terminals: Clean corroded terminals with baking soda and water or a dedicated cleaner. Tighten them securely after cleaning.
  3. Replace Weak Battery: If the battery is old and can’t hold a charge, replace it with a new one that meets the specifications for the John Deere L130.
  4. Test Alternator: If the battery keeps draining, the alternator may be faulty. Have a professional test its output and replace it if needed.

Preventative Maintenance: To avoid battery troubles:

  • Keep the battery clean and free of corrosion.
  • Use a trickle charger for lawn mower or disconnect the battery when storing the mower for a long time.
  • Regularly inspect the battery’s health and charging capacity as part of routine maintenance.

11. Electrical System Malfunctions in L130 John Deere

The electrical system is vital for the John Deere L130 riding lawn mower. It operates lights, safety switches, and ignition systems.

Malfunctions in this system can lead to non-functioning or erratic behavior of these components, affecting the mower’s performance.

Possible Causes:

  1. Wiring Issues: Wiring can get damaged, corroded, or disconnected over time due to wear, moisture, or rodents.
  2. Blown Fuses: Fuses protect the system but can blow when overloaded or short-circuited.
  3. Faulty Switches: Worn-out, damaged, or improperly adjusted switches can lead to component malfunctions.

Possible Fixes:

  1. Inspect Wiring: Check for damage, wear, or corrosion. Repair or replace damaged wires and ensure secure connections.
  2. Check and Replace Fuses: Locate the fuse box, check for blown fuses, and replace them with new ones of the same rating.
  3. Test Switches: Verify that all switches function correctly. Replace faulty switches with proper replacements.

Preventative Maintenance:

  • Regularly inspect and maintain electrical components.
  • Protect wiring from moisture and rodents.
  • Follow manufacturer guidelines and avoid overloading the system.

Troubleshooting John Deere L130 Problems

ProblemPossible CauseSolution
Engine doesn’t startWeak or dead battery, corroded terminals, faulty alternatorCheck battery charge and connections. Clean terminals or replace the battery if needed. Test the alternator.
Engine overheatsClogged air filter, cooling system issues, low oil levelClean or replace the air filter. Check the cooling system and add coolant if necessary. Maintain proper oil level.
Clutch problemWorn or damaged clutch, loose belt, misadjusted clutchInspect and replace the clutch if worn. Tighten or replace belts. Adjust the clutch properly.
Transmission issuesLow transmission fluid, damaged drive belt, worn gearsCheck and top up transmission fluid. Inspect and replace the drive belt if necessary. Repair or replace worn gears.
Rear end problemFaulty differential, worn or damaged axleInspect and replace the differential if needed. Check and repair or replace damaged axles.
Steering issuesLoose or damaged steering componentsTighten or replace loose or damaged parts. Lubricate steering system regularly.
Carburetor problemsClogged carburetor jets, fuel delivery issuesClean or replace clogged carburetor jets. Inspect and fix fuel delivery problems.
Battery troublesWeak or dead battery, corroded terminals, faulty alternatorCheck battery charge and connections. Clean terminals or replace the battery if needed. Test the alternator.
Electrical system malfunctionsWiring issues, blown fuses, faulty switchesInspect and repair wiring. Check and replace blown fuses. Test and replace faulty switches.
Fuel delivery problemsClogged fuel filter, dirty carburetor, fuel pump issuesReplace the fuel filter regularly. Clean the carburetor. Inspect and troubleshoot the fuel pump.


What are the most common John Deere L130 problems?

Like any other machine, John Deere l130 problems are many and varied. But the most common ones are the engine refusing to start, overheating, and too much vibration. 

The mower may also experience clutch issues, transmission and steering problems. In addition, you may need to grapple with carburetor and rear-end problems.

Is John Deere L130 A Good Mower?

John Deere’s L130 version is certainly a good mower. You can deploy the machine to almost any use, from mowing grass to blowing snow on your driveway. 

Also, the machine is robust and built to give service for your money. And even when it breaks down, it is easier to fix than other mowers. 

John Deere L130 Alternatives

Some of the alternatives include:

~John Deere la130

The machine comes with the following problems:

  • The engine is hard to start
  • Engine runs rough
  • The mower leaves behind uncut grass
  • The belt vibrates excessively

~John Deere S140

The mower comes with the following problems:

  • The engine is hard to start
  • Engine performs poorly

~John Deere L120

John Deere L120 problems are as follows

  • Engine runs unevenly
  • Engine overheating
  • The engine will not idle
  • Experiences engine vapor locks

~John Deere LA145

A good mower but comes with theh following issues:

  • Hard to start the engine
  • Engine misses
  • The machine vibrates a lot

John Deere L130 Problems Summary

Although the list of John Deere’s mowing machines is long, the l130 version is the most preferred. Indeed, it is, for a good reason. It is a 2-cylinder machine that runs on an improved Kohler CV23S Engine. 

Even so, the mower has its fair share of problems. Thus, the mower could be your best option if you can find solutions to the problems.